If you are fascinated in any of our merchandise or would like to examine a prospective buy, you should truly feel totally free to speak to us. Furthermore, all our manufacturing procedures are in compliance with ISO9002 standards. Our product variety also covers locking assemblies (clamping factors/locking gadget), taper bushes, QD bushes, bolt-on hubs, torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod ends and yokes. EPTT SHXiHu (West EPT) Dis.HU (WEST LAKE) DIS.I eleven.6Ton 140HP SG14 EPT GraEPTTEPT
Solution Overview
SG14 motor graEPTTadopts the external ring EPT sort functioning device to obtain increased transmitted torque, greater blade cutting angle, and EPT material handle capacity and functions the maXiHu (West EPT) Dis.mum traction pressure amid the domestic like EPTTs. This EPTT is relevant for large-area leveling, ditching, sXiHu (West EPT) Dis.Hu (West EPT) Dis.e scraping, bulldozing, ripping, land clearing, and snow eliminating and is an ideally important EPTT for large building constructions, drinking water conservancy assignments.
Main Configurations
Model | SG14 | SG16-3 | |
Fundamental | Operating Fat | 11600kg | 15400kg |
parameter | Max. traction | 65kN | 86kN |
Least floor clearance | 430mm | 430mm | |
Gradeability | 20 deg | twenty deg | |
Min. Turning Radius | 6600mm | 7800mm | |
Entrance wheel steering angle | plusmn45 deg | plusmn45 deg | |
Chassis steering angle | plusmn25 deg | plusmn25 deg | |
The front axle tilt angle | plusmn17 deg | plusmn17 deg | |
The entrance axle swing angle | plusmn15 deg | plusmn15 deg | |
Rear axle swing angle | plusmn15 deg | plusmn15 deg | |
Brake pressure | 10MPa | 10MPa | |
Doing work pressure | 16MPa | 16MPa | |
Front axle load | 3480kg | 4600kg | |
Rear axle load | 8120kg | 10800kg | |
Motor | Motor Model | ||
6BTAA5.9-C150 | 6BTAA5.9-C160 | ||
Variety | Inline six cylinder, turbocharged, | ||
air cooled diesel engine | |||
Rated EPTT | 112kW/2200rpm | 118kW/2200rpm | |
MaXiHu (West EPT) Dis.mum torque | 670N.m/1400rpm | 690N.m/1300rpm | |
Displacement | five.9L | five.9L | |
Minimum gas | 202g/kW.h | 205g/kW.h | |
intake | |||
Vacation pace | Froward one-six | -five.4km/h -eight.3km/h -thirteen.2km/h | |
-20.6km/h -29.6km/h -44km/h | |||
Reverse one-three | -five.4km/h | ||
-13.2km/h | |||
-29.6km/h | |||
Blade | Blade width | 3660mm | 3660mm |
Blade height | 615mm | 635mm | |
Turning angle | 360 deg | 360 deg | |
EPTg angle | plusmn90 deg | plusmn90 deg | |
Blade cutting angle | 30-68 deg | forty four-ninety one deg | |
sdjustment range | |||
MaXiHu (West EPT) Dis.mum reducing depth | 500mm | 500mm | |
MaXiHu (West EPT) Dis.mum lifting peak | 460mm | 440mm | |
Device chopping force | seventeen.76kN/m | 23.5kN/m | |
MaXiHu (West EPT) Dis.mum lateral | 1700/2000mm | 1900/1950mm |
GraEPTTPhoto